Specs and Requirements
Video Inputs
# Composite (BNC)
# S-Video (4 Pin Mini-Din YC) analog to digital conversion 9 bit with scaling Horizontal and Vertical 16 tap filters.
# (Option) SDI input video with embedded SMPTE 259M AES-EBU audio on BNC.
# (Option) Firewire: DV25 with PCM audio and control on Mini-Firewire connector.
Video Outputs
# One decode configurable to DVI-I,
S-Video (4 Pin Mini-Din YC), Composite (BNC).
Cable required for VGA, YUV, HDMI, RGBHV and RGB.
VBI Support
# Line 21-Closed Captioning DVS053 Rev 6
# V-Chip DVS157
# Teletext: NABTS-DVS053 Rev 6 and PAL
# Neilson Source Identification (SID) DVS053
# Automated Measurement of Lineups (AMOL) DVS053
Video Encoding and Decoding
# MPEG 1 SD 1 Profile: SIF ISO 11172-2
# MPEG 2 SD 2 Profile: Adaptive Field Frame (AFF) ISO13818 MP@ML
# MPEG 2 SD Profile: AFF ISO13818 422P@ML (encode only option)
# Encoder Filters: Temporal; Spatial Vertically and Horizontally Temporal and Horizontal Spatial can be concurrent
# Chroma filtering and full scaling
# Video bit rates: MPEG 2 SD 300K-15 Mbs
# Video bit rates: MPEG 1 SIF 300K-5 Mbs
# Multiplexing Formats: Program (MPEG 1) and Transport (MPEG 2)
# MPEG Program Specific Information (PSI) Table Compliance: PAT, PMT; All PIDs user definable
# DVB Service Information (SI) Table Compliance: SDT, NIT; All PIDs user definable
# SCTE 35 Splice Point injection
Video Resolutions
# Per Macro Block (16x16) Note: Non-standard Vertical resolutions may adversely effect STB decoders, PC decoders have more flexibility when scaling.
# Horizontal NTSC examples: 720x480 (Full D1 NTSC), 544x480, 528x480, 512x480, 496x480, 480x480, 352x480 (Half D1 NTSC).
# Vertical NTSC example: 720x 464
# Horizontal and Vertical example: 528x464 etc.
# PAL resolutions examples: 720x576 (FullD1 PAL), 720x560, 544x544 etc
Availability:
MEDIAHUB: Media ingest and prep station w/RS422 control, preview decode, MPEG & Dolby stereo audio w/300GB IDE drive.
MEDIAHUB-FW: Media ingest and prep station w/RS422 control, FireWire & SDI in, preview decode, MPEG & Dolby stereo audio, w/300GB IDE drive.
MEDIAHUB-PRO: Media ingest and prep station w/RS422 deck control, preview decode, SDI in, MPEG & Dolby stereo audio w/300GB IDE drive.
# What’s Included: mediaHUB Media Ingest
# mediaControl Application control & configuration software
# Connection Kit: Ethernet cable and serial 9 pin adapter (PN:TERMINALKIT1)
# Audio: Five euro audio removable screw terminal (RST)connectors
# Audio/video cable: AV break out cable with S-Video, SPDIF, Composite video BNC pigtails (PN: Media Cable ) BNC Composite Video, RCA S/PDIF Audio), power cord, Ethernet cable, serial adapter
# Manual (CAT-014-H-2.0)
Audio Inputs
# Analog Audio 1 Stereo Balanced (5 Pin Removable Screw Terminal)
# Analog Audio 2 Stereo (SAP) Balanced (5 Pin Removable Screw Terminal)
# User level control on Analog inputs
# AES-1 digital audio (PCM or uncompressed) for Dolby AC-3 channel 1,2 encoding (5 Pin RST - 110 Ohm).
# AES-2 digital audio (PCM or uncompressed) for Dolby AC-3 channel 3,4 encoding (5 Pin RST - 110 Ohm).
# SDI embedded with video per SMPTE 272M A, B, C, (BNC)
# Digital PCM audio via Firewire
# Audio inputs can be mixed, one Analog, one AES-EBU, or One AES-EBU and one SDI etc.
Audio Outputs
# encoder module has AES (110 Ohm) out of compressed bit stream or PCM audio during encode (does not work after encode)
# decoder module simultaneous S/PDIF digital audio (RCA female) and unbalanced analog stereo audio (L/R RCA female). Digital audio PCM at 16, 20 and 24 bps up to 5.1 channels compressed.
# decoder module (3.5 mm) selectable between audio tracks 1 and 2 decode.
# decoder module fixed unity analog audio level output
Audio Encoding and Decoding
# Dolby Digital 2/0 or 1/0 (AC-3) encoding from analog, SDI embedded audio or AES input.
# MPEG 1 Layer 1 Profile: ISO11172-3
# MPEG 1 Layer 2 Profile: ISO13818-3
# Audio Delay: Adjustable PTS delay up to 700 milliseconds
# 24 Bit A-D Conversion
# Audio Sampling: 16, 22.05, 24, 32, 44.1 and 48 KHz
# MPEG 2 Audio Bit Rate: 64-384 Kbs
# Dolby Digital AC-3 Bit Rate: 64-640 Kbs
mediaHUB Server
# Adtec optimized POSIX compliant embedded Linux 2.6 kernel
# 300 GB internal storage.
# Power: 70-240 VAC 50-60Hz and 65 Watts (20 Watts typical) of power.
# Size: 1RU rack mount chassis. 19” width, 1.75” height, 16” depth (48.26cm X 4.45cm X 40.64cm)
# Weight: 14 lbs (6.35kg)
# Environmental: Active cooling (Fans), 0 to 90 Degrees Fahrenheit, Less than 70% RH, Non-Condensing
Communications
# Ethernet 10/100 (RJ-45) Half Duplex, Full Duplex, Auto Negotiate
# Ethernet Protocols: Telnet and XCP Adtec command API, FTP, HTTP, SNMP (MIBII)
# Serial Communications: 2-RS232 (38400-115,200K, 8, 1 N)
# Samba, NAS and FTP file mounts or transfers
# Automatically copy files from mediaHUB server to client PC using FTP.
Front Panel
# Keypad: Mode, Select, Enter, Escape, Up, Down, Left, Right
# Blue Translucent LCD (20 character by 2 row)
# Host Status LEDs Power, Alarm, Link, Busy, Storage.
# Encode Status LEDs: Encode Active, Video Present, LTC Active, Audio 1 & 2, Control, Alarm.
# Decode Status LEDs: Decode Active, Video Present, LTC Active, Audio 1 & 2, Control, Alarm.
mediaControl Application
mediaHUB configuration and control application requires one of the following:
# Windows XP and 2000 or Linux computer: Intel or AMD 32 bit processor at 2 GHz; 512MB memory; 1024x768 32 Bit color capable graphics card; TCP/IP compatible computer network.
# Macintosh OS-X (10.2 or greater) computer: G4 32 bit processor at 1 GHz, G5 64 bit processor (any); 512MB memory; 1024x768 32 Bit color capable graphics card; TCP/IP compatible computer network.
|
|
|
